BMC User Guide

• 1. Introduction
  • 1.1. BMC command line interface
  • 1.2. Graphical user interface
  • 1.3. REST API
  • 1.4. IPMI
  • 1.5. Redfish
  • 1.6. Abbreviations and acronyms
• 2. IPU-Machine BMC specification
  • 2.1. BMC subsystem
    • 2.1.1. System FPGA
    • 2.1.2. LEDs
    • 2.1.3. Ethernet Switch
  • 2.2. BMC functions
  • 2.3. IPU-Machine block diagram
  • 2.4. Supported IPMI commands
• 3. Power operations
  • 3.1. BMC command line
    • 3.1.1. Power cap operations
  • 3.2. REST API
  • 3.3. IPMI
  • 3.4. Redfish
• 4. Sensor monitoring
  • 4.1. BMC command line
  • 4.2. REST API
  • 4.3. IPMI
  • 4.4. Redfish
  • 4.5. List of monitored sensors
• 5. Inventory monitoring
  • 5.1. BMC command line
  • 5.2. REST API
  • 5.3. IPMI
  • 5.4. Redfish
• 6. Events and logging
  • 6.1. BMC command line
  • 6.2. REST API
  • 6.3. IPMI
    • 6.3.1. Sensors crossing threshold SEL logs examples
    • 6.3.2. Inventory Items failure or present detection error SEL logs examples
  • 6.4. Redfish
  • 6.5. List of supported events
    • 6.5.1. Sensor crossing threshold events
    • 6.5.2. Inventory items presence or functional-state events
• 7. Maintenance mode and BIST
  • 7.1. BMC command line
  • 7.2. Host command line
  • 7.3. REST API
  • 7.4. IPMI
  • 7.5. Redfish
• 8. Firmware operations
  • 8.1. REST API
  • 8.2. IPMI
  • 8.3. Redfish
• 9. User management
  • 9.1. BMC command line
  • 9.2. REST API
  • 9.3. IPMI
  • 9.4. Redfish
  • 9.5. LDAP integration
• 10. Network configuration
  • 10.1. BMC command line
  • 10.2. REST API
  • 10.3. IPMI
• 11. Serial over LAN (SoL)
  • 11.1. BMC command line
  • 11.2. IPMI
• 12. Debug collector
  • 12.1. REST API
• 13. Reset lost root password
  • 13.1. BMC command line
  • 13.2. Factory reset from U-Boot
• 14. Time settings
  • 14.1. BMC command line
  • 14.2. REST API
  • 14.3. IPMI
  • 14.4. Redfish
• 15. Summary of supported IPMI commands
• 16. Fan PWM to speed mapping
• 17. Trademarks & copyright